Is Picklesburgh Open Late On Fridays?

Oh, this is one of those tiny math tricks that makes life way easier once you get the pattern down — converting milliseconds into standard hours, minutes, seconds, and milliseconds is just a few division and remainder steps away. First, the core relationships: 1,000 milliseconds = 1 second, 60 seconds = 1 minute, and 60 minutes = 1 hour. So multiply those together and you get 3,600,000 milliseconds in an hour. From there it’s just repeated integer division and taking remainders to peel off hours, minutes, seconds, and leftover milliseconds. If you want a practical step-by-step: start with your total milliseconds (call it ms). Compute hours by doing hours = floor(ms / 3,600,000). Then compute the leftover: ms_remaining = ms % 3,600,000. Next, minutes = floor(ms_remaining / 60,000). Update ms_remaining = ms_remaining % 60,000. Seconds = floor(ms_remaining / 1,000). Final leftover is milliseconds = ms_remaining % 1,000. Put it together as hours:minutes:seconds.milliseconds. I love using a real example because it clicks faster that way — take 123,456,789 ms. hours = floor(123,456,789 / 3,600,000) = 34 hours. ms_remaining = 1,056,789. minutes = floor(1,056,789 / 60,000) = 17 minutes. ms_remaining = 36,789. seconds = floor(36,789 / 1,000) = 36 seconds. leftover milliseconds = 789. So 123,456,789 ms becomes 34:17:36.789. That little decomposition is something I’ve used when timing speedruns and raid cooldowns in 'Final Fantasy XIV' — seeing the raw numbers turn into readable clocks is oddly satisfying. If the milliseconds you have are Unix epoch milliseconds (milliseconds since 1970-01-01 UTC), then converting to a human-readable date/time adds time zone considerations. The epoch value divided by 3,600,000 still tells you how many hours have passed since the epoch, but to get a calendar date you want to feed the milliseconds into a datetime tool or library that handles calendars and DST properly. In browser or Node contexts you can hand the integer to a Date constructor (for example new Date(ms)) to get a local time string; in spreadsheets, divide by 86,400,000 (ms per day) and add to the epoch date cell; in Python use datetime.utcfromtimestamp(ms/1000) or datetime.fromtimestamp depending on UTC vs local time. The trick is to be explicit about time zones — otherwise your 10:00 notification might glow at the wrong moment. Quick cheat sheet: hours = ms / 3,600,000; minutes leftover use ms % 3,600,000 then divide by 60,000; seconds leftover use ms % 60,000 then divide by 1,000. To go the other way, multiply: hours * 3,600,000 = milliseconds. Common pitfalls I’ve tripped over are forgetting the timezone when converting epoch ms to a calendar, and not preserving the millisecond remainder if you care about sub-second precision. If you want, tell me a specific millisecond value or whether it’s an epoch timestamp, and I’ll walk it through with you — I enjoy doing the math on these little timing puzzles.

Okay, let me unpack this in a practical way — I read your phrase as asking whether using millisecond/hour offsets (like shifting or stretching subtitle timestamps by small or large amounts) can cut down subtitle sync errors, and the short lived, useful truth is: absolutely, but only if you pick the right technique for the kind of mismatch you’re facing. If the whole subtitle file is simply late or early by a fixed amount (say everything is 1.2 seconds late), then a straight millisecond-level shift is the fastest fix. I usually test this in a player like VLC or MPV where you can nudge subtitle delay live (so you don’t have to re-save files constantly), find the right offset, then apply it permanently with a subtitle editor. Tools I reach for: Subtitle Edit and Aegisub. In Subtitle Edit you can shift all timestamps by X ms or use the “synchronize” feature to set a single offset. For hard muxed matroska files I use mkvmerge’s --sync option (for example: mkvmerge --sync 2:+500 -o synced.mkv input.mkv subs.srt), which is clean and lossless. When the subtitle drift is linear — for instance it’s synced at the start but gets worse toward the end — you need time stretching instead of a fixed shift. That’s where two-point synchronization comes in: mark a reference line near the start and another near the end, tell the editor what their correct times should be, and the tool will stretch the whole file so it fits the video duration. Subtitle Edit and Aegisub both support this. The root causes of linear drift are often incorrect frame rate assumptions (24 vs 23.976 vs 25 vs 29.97) or edits in the video (an intro removed, different cut). If frame-rate mismatch is the culprit, converting or remuxing the video to the correct timebase can prevent future drift. There are trickier cases: files with hour-level offsets (common when SRTs were created with absolute broadcasting timecodes) need bulk timestamp adjustments — e.g., subtracting one hour from every cue — which is easy in a batch editor or with a small script. Variable frame rate (VFR) videos are the devil here: subtitles can appear to drift in non-linear unpredictable ways. My two options in that case are (1) remux/re-encode the video to a constant frame rate so timings map cleanly, or (2) use an advanced tool that maps subtitles to the media’s actual PTS timecodes. If you like command-line tinkering, ffmpeg can help by delaying subtitles when remuxing (example: ffmpeg -i video.mp4 -itsoffset 0.5 -i subs.srt -map 0 -map 1 -c copy -c:s mov_text out.mp4), but stretching needs an editor. Bottom line: millisecond precision is your friend for single offsets; two-point (stretch) sync fixes linear drift; watch out for frame rate and VFR issues; and keep a backup before edits. I’m always tinkering with fan subs late into the night — it’s oddly satisfying to line things up perfectly and hear dialogue and captions breathe together.

Totally — you can call to confirm Beverly Hills library hours today, and I usually do that when I’m planning a quick trip. I’ll often look up the library’s phone number via Google Maps or the official city website, then ring their main line during expected business hours. If you hit voice mail, listen for recorded holiday closures or special notices; many libraries put updated info on the recording first. If you want to get extra mileage out of the call, ask about last-minute program cancellations, whether curbside pickup is running, and any temporary study-room restrictions. I also check the library’s social pages after I call — sometimes they post photos or quick notes about unexpected closures. Ringing actually saves me time compared to arriving to find the doors locked, and it’s satisfying to hear a human confirm the details before I hop in the car.

If you're planning a Saturday run to the stacks, here's what I've learned from my visits: the Bettendorf Public Library typically keeps weekend hours that are shorter than weekdays. In my experience and from checking their event listings, Saturdays are usually a daytime affair — they open in the morning and close in the late afternoon. For most weeks that means the building is available to browse, pick up holds, and use public computers during regular daytime hours. That said, I always plan around two little caveats. One, hours shift for holidays and sometimes for summer schedules or special events (I once showed up during a city parade weekend when hours were different). Two, programs like storytime or special workshops can make parts of the library busier or alter specific room access. My habit now is to glance at the library's official website or give them a quick call the day before, especially if I'm planning to attend a specific program or meeting someone there — it saves a wasted trip and keeps my book haul dreams intact.

I've checked their page a bunch of times, and in my experience the Bettendorf Public Library posts its regular weekly hours on the official site and keeps them stable until there's a reason to change them. They update the online hours basically whenever there's a change — holidays, special events, or sudden weather closures — so you'll usually see the new times posted promptly. Google Maps and Facebook often reflect those changes quickly, but sometimes those third-party listings lag by a few hours. If I’m planning a visit around a holiday or during winter storms, I check the library's website the morning I go and give them a quick call if anything looks off. It’s a small habit that saves me a wasted trip and lets me plan my day around storytime or a quiet reading session instead of showing up to locked doors.

When I check local library schedules I always expect the usual dance around holidays: Prince George's County branches typically observe major federal holidays and will be closed on days like New Year's Day, Independence Day, Thanksgiving Day, and Christmas Day. I've noticed over the years that some locations also close early on Christmas Eve or New Year's Eve, and a few branches might have limited service on other holidays. It isn't universal—hours can vary by branch—so the safe bet is to assume major holiday closures unless you see otherwise. If I'm planning a visit, I first pull up the branch page on the library's website or their social feeds. They usually post holiday schedules in advance, and the online catalog often shows whether a branch is open right now. I also keep a mental note that book drops are often accessible even when the building is closed, and digital services like e-books and streaming are available 24/7, which saves me on those shut-down days.

I've checked the University of Sydney Library setup a bunch of times for deadlines, and the short version is: hours change a lot depending on which library, the time of year, and whether it's an exam period. Generally, the big central libraries (like Fisher) run extended weekday hours during semester — commonly opening in the early morning and staying open into the evening — while weekends are shorter. During main teaching weeks you can usually expect something like early-morning starts and late-evening closes on weekdays, with reduced hours on Saturdays and Sundays. What really matters is that these are only generalities. Some branches (law, health sciences, or specialised campus libraries) have completely different timetables, and the university often switches to 24/7 access for at least part of exam season at selected sites. I always check the official 'Library opening hours' page on the university's website or use the library chat before heading over. That saves me unnecessary trips and helps me book group rooms or study pods when they’re available — plus those pages list public-holiday closures and contact options if you need help.

I usually plan my Saturday around a 9:00 AM start — most Ferguson Library branches I’ve used open their doors around 9 AM on Saturdays. For example, the main branch in my area typically welcomes visitors at 9:00, with quieter mornings perfect for grabbing a study carrel or browsing new arrivals. If you like a slow coffee-and-book vibe, arriving right when they open is my go-to move. That said, not every Ferguson location is identical. Some suburban or smaller branches open a bit later, around 10:00, and holiday weekends can shift hours. If you want to be 100% certain, peek at the library’s official website, check their Google listing, or call the branch — I’ve saved their phone number in my contacts for exactly this reason. It’s a small habit that saves me from wandering around wondering why the lights are off.