What Post-Processing Works Best For Markforged Onyx Filament?

2025-07-28 08:21:14 197

3 Answers

Finn
Finn
2025-07-31 02:38:34
Post-processing Markforged Onyx filament can really elevate the final product, and I’ve experimented with several methods to get the best results. Sanding is a must—I start coarse and work my way up to fine grits, sometimes wet sanding for an even smoother finish. After sanding, I often use a filler primer to seal the surface, followed by another round of fine sanding. For parts that need extra toughness, a thin layer of epoxy resin can add significant strength and a glass-like finish.

If aesthetics are a priority, painting is a great option. I’ve had success with acrylics and enamels, but adhesion promoters help the paint stick better. For a metallic look, I’ve used Rub ‘n Buff wax with great results. Another trick is vapor smoothing with acetone, though it’s tricky and requires careful control to avoid melting details. Heat gun post-processing can also help smooth surfaces, but it’s easy to warp the part if you’re not careful.

For functional parts, I sometimes machine the Onyx after printing to get precise tolerances. It’s a bit more advanced, but the material handles it well. Lastly, if you’re after a polished industrial look, a rotary tool with a buffing wheel and polishing compound can give you a mirror-like finish. Each method has its pros and cons, so it depends on what you’re aiming for.
Ulysses
Ulysses
2025-07-31 03:36:16
I’ve been working with Markforged Onyx filament for a while now, and I’ve found that sanding is the most effective post-processing step. Starting with 120-grit sandpaper to remove layer lines and gradually moving up to 400-grit gives the part a smooth, almost injection-molded finish. A light coat of filler primer can help fill in any tiny imperfections before the final sanding. For a glossy look, I’ve had great results with automotive clear coat spray. It adds durability and a professional shine. If you’re going for a matte finish, a light blast with a sandblaster works wonders. Just be careful not to overdo it, as Onyx is strong but can still get damaged if you’re too aggressive.
Freya
Freya
2025-08-02 20:13:44
When it comes to post-processing Markforged Onyx, I like to keep things simple but effective. Sanding is my go-to, starting with 200-grit and moving up to 600 for a super smooth feel. I’ve found that a bit of elbow grease goes a long way. For a quick and easy upgrade, a few coats of spray paint can make a huge difference—just make sure to sand first for better adhesion.

If you want something more durable, try a clear polyurethane finish. It’s tough and gives the part a slight sheen. For industrial-looking pieces, a light sandblast followed by a matte sealant works great. I’ve also experimented with dyeing Onyx, but it’s tricky since the material doesn’t absorb color easily. Instead, I’ve had better luck with airbrushing details for a custom look. The key is to test small areas first to see what works best for your project.
Tingnan ang Lahat ng Sagot
I-scan ang code upang i-download ang App

Kaugnay na Mga Aklat

Revenge Is Best Served Post-reincarnation
Revenge Is Best Served Post-reincarnation
Evonne Shannon was a poor student mother sponsored. She was also the crush I had been courting for a long time. Wanting to allow her to shine, I gave up my place in the piano competition for her. However, she glared at me with disdain for deciding this on my own. She then instantly turned around and handed the registration form to her boyfriend, Angelo Zambrano, and said, "Ange, only you deserve this competition." Evonne liked sports cars, so I begged my mother to buy her a limited-edition McLaren supercar. But in return, Evonne mocked me and called me shallow. "Don't think I'll accept you just because I'm accepting the car, Chase Shannon. You've never understood me." With my help, Evonne got to put on a facade of a mysterious billionaire's daughter. But the moment she got money from me, she turned around and went on a romantic getaway with Angelo. I thought of Evonne as my everything and even asked my mother to arrange for her to join the family company. Within half a year, she was promoted to a core team member. She then conspired with Angelo to drain the company dry and even forced me to my death. "What else can you do besides insult me with money and a materialistic lifestyle, Chase? You're the most disgusting obstacle on my path to success. Only when you're dead can I marry Ange," she declared. I was heartbroken when I heard this, and that was when Evonne pushed me off the sidewalk and into traffic. Immediately after that incident, I was reincarnated to the day I bought Evonne a piano. She was glaring at me with disdain. "If you don't want to buy it, just say so. There's no need to humiliate me like this." I let out a dismissive scoff. "Am I the one who's humiliating you, or are you the shameless one? You beg for food but complain that it's cold. You're worse than those stray dogs on the streets. At least they show gratitude after getting scraps."
8 Mga Kabanata
Post-Divorce Seduction
Post-Divorce Seduction
"Honey, it hurts …" Three years after getting married, Chelsey Jenson finally beds her husband, Lucas Yates.But even as he's above her, he's calling out his first love's name. "Shannon, I love you …"Lucas loses his sight for three years, and Chelsey cares for him without a complaint through the whole ordeal. What's the first thing he does upon regaining his sight? Seek out his first love.During an interview with the media, Chelsey announces, "Lucas Yates has erectile dysfunction and can't satisfy me in bed. I want a divorce!"The divorce becomes the talk of the town; everyone knows the handsome, rich, and powerful Lucas is useless in bed.Many years later, Lucas ends up chasing Chelsey all over the world. "Honey, I was wrong. Let's remarry!"Chelsey turns him down without hesitation. "I'm not interested in men with ED, so stay as far away from me as possible. Don't stop me from getting together with those young and fresh men!"
8.9
354 Mga Kabanata
That’s Not How Love Works
That’s Not How Love Works
I fell for my next-door neighbor, James Grayson. I even tried to seduce him in a sexy nightdress. But he humiliated me by throwing me out in front of everyone. I was utterly embarrassed. The next day, he told me straight up that he was getting engaged, and I should just give up. So, I did. I let him go and said yes to someone else’s proposal. But on my wedding day, James showed up looking like a mess and tried to stop the wedding. “Summer, I regret everything.” But by then, my heart already belonged to my husband.
8 Mga Kabanata
Life Works in Mysterious Ways
Life Works in Mysterious Ways
Sophia Ivanov Loosing my mother at the age of 16, the only person out of my parents who showered me with love, being left behind with the person who hated me. I always thought it was because I was a girl but he never looked at my baby sister Lucy with the look of disgust on his face. He always had the look of adoration and affection in his eye's whenever he looked at my brother's and Lucy. At he age of 20, my wedding was ambushed by a mafia, my husband killed in between the crossfire and me being rushed to the hospital.Waking up in that hospital I wasn't the same giddy Sophia. I started training, getting better then my brother's. Papa giving me extra attention then my brother's, taking me on mission's with him. Papa never let my brothers go on mission's. That was our father and daughter time. Killing people in cold blood without any remorse. Years went past and my older brother Alessandro died. A nother person I held dearly to my heart being ripped away from me. That same year Papa stepped down as the Don of the Russian mafia, handing the responsibility over to me. Taking the Russian mafia to the next level, continuing papa's legacy but ten times better. I was worse then papa was and people feared me more then papa. I was a Ivanov, this was my destiny but as the years went past, mafia's got fearless because papa got old and they thought papa was still the Don. Mafia's who got bold enough, to threaten my family and my mafia. I took care of them one by one but what I never expected was to find out the truth about my family, about everything I thought I knew my whole life.
Hindi Sapat ang Ratings
26 Mga Kabanata
Life After (Post apocalyptic book)
Life After (Post apocalyptic book)
Humanity has finally done it and destroyed the world. After the spread of the killer virus that no one had a cure for, countries started to fight as greed has pushed them to expand their territories. And in the process, they provoked mother nature to take a stand. The plague evolved into something that twisted and deformed humans; they were neither dead nor alive. Just walking empty husks that fed on flesh and had one purpose, killing. The supernatural were exposed to the rest of the world; as they weren't spared and got affected, too. The result of this knowledge was chaos. Instead of creating one unity, the rest of the living were fighting among themselves and the undead. The entire world turned into a big arena and it was (survival of the fittest).
Hindi Sapat ang Ratings
18 Mga Kabanata
Blood and Moon: Book Two - Onyx
Blood and Moon: Book Two - Onyx
Onyx is a powerful, young warrior vampire of pure-blood decent and daughter of her clan’s leader. Against her wishes she has been betrothed to Elijah, the soon-to-be leader of a fellow clan in hopes of creating a union between the two as the continuing feud between vampires, werewolves, and witches rages on. She despises Elijah remembering how he treated her as a child, but now they are both adults and he has changed in a way that she can’t explain. She has always followed the rules and known her place and wants nothing more than to eliminate the werewolf species.. well, until she met him. Atlas will be the next alpha of his pack. Although she despises wolves, something is different about him. Her once cold, heartless, and vicious demeanor is being softened. She never believed in destiny, but how can you fight something you can’t control? How do you choose between your heart and your commitment?
8.7
83 Mga Kabanata

Kaugnay na Mga Tanong

What Printers Are Compatible With Markforged Onyx Filament?

3 Answers2025-07-28 07:23:59
I've been using Markforged printers for a while now, and the Onyx filament is one of my favorites because of its strength and finish. The best printers for Onyx are naturally Markforged's own, like the 'Mark Two', 'X7', and 'X5'. These printers are designed to handle the unique properties of Onyx, especially its carbon fiber reinforcement. I’ve tried third-party printers, but they often struggle with the high temperatures and precision needed. The 'Onyx One' is also a solid choice if you’re looking for something more budget-friendly but still reliable. Stick with Markforged printers for the best results—they’re built for this filament.

Where To Buy Markforged Onyx Filament For 3D Printing?

3 Answers2025-07-28 23:52:06
I've been into 3D printing for years, and sourcing high-quality filaments like Markforged Onyx is crucial for strong, professional prints. I usually buy mine directly from the Markforged website because they offer the most reliable supply and customer support. Their official store ensures you get authentic material with consistent quality, which matters a lot for precision prints. I’ve also had good experiences with authorized resellers like MatterHackers and Amazon, but you have to double-check seller ratings to avoid counterfeits. Local industrial suppliers sometimes stock it too, but availability varies. Always check the spool labels and packaging to confirm it’s genuine Markforged Onyx—knockoffs can ruin your prints and even damage your printer.

How Strong Is Markforged Onyx Filament Compared To Nylon?

3 Answers2025-07-28 08:02:21
As someone who's been tinkering with 3D printing for years, I can confidently say that Markforged Onyx filament is a game-changer. It's not just strong—it's *ridiculously* strong compared to standard nylon. Onyx has this unique carbon fiber reinforcement that gives it a tensile strength around 800 MPa, which is way higher than most nylons sitting at 50-80 MPa. The layer adhesion is insane, and it handles impact like a champ. I’ve printed gears and brackets with Onyx that survived way more abuse than my old nylon prints ever could. The surface finish is also smoother, almost like it’s been sanded down. If you need durability, Onyx is the way to go.

What Are The Best Print Settings For Markforged Onyx Filament?

3 Answers2025-07-28 12:26:19
I've been 3D printing with Markforged Onyx filament for a while now, and I’ve found that the best print settings depend on what you’re aiming for. For general use, I stick to a nozzle temperature of around 270-280°C and a bed temperature of 80-90°C. The layer height I prefer is 0.1mm for detailed prints, but 0.2mm works just fine for stronger, functional parts. I always use a brim or raft for better adhesion, especially for larger prints. The print speed is usually set between 30-50mm/s to ensure quality without sacrificing too much time. Cooling is minimal, just around 30% fan speed after the first few layers, to prevent warping but still maintain layer adhesion. These settings have given me consistently good results, whether I’m printing prototypes or final parts.

Is Markforged Onyx Filament Suitable For Aerospace Applications?

3 Answers2025-07-28 15:19:54
As someone who tinkers with materials and follows aerospace trends, I've seen Markforged Onyx filament pop up in discussions. It's a nylon-based composite with chopped carbon fiber, which gives it impressive strength and heat resistance. For aerospace, those properties matter a lot. I've used it for drone parts that need to be lightweight but handle stress, and it performs way better than standard plastics. The layer adhesion is solid, and it doesn't warp easily, which is crucial for parts that face temperature swings. That said, it's not a magic bullet—high-end aerospace still relies on metals or advanced composites for critical components. But for prototyping, non-structural parts, or even some UAV applications, Onyx is a strong contender. The ability to print complex geometries without machining is a huge plus, and the surface finish is smoother than most filaments, reducing post-processing time.

What Is The Layer Adhesion Strength Of Markforged Onyx Filament?

3 Answers2025-07-28 07:13:23
I've been working with Markforged Onyx filament for a while now, and the layer adhesion strength is seriously impressive. It’s one of those materials that just holds together like a champ, even under stress. From my experience, parts printed with Onyx can handle a lot of bending and twisting before they give way, which makes it perfect for functional prototypes. The nylon base gives it that extra toughness, and the carbon fiber filler boosts the strength even more. I’ve compared it to other filaments, and Onyx stands out because the layers bond so well during printing. If you’re looking for something durable and reliable, this filament won’t let you down. It’s become my go-to for parts that need to last.

How Does Markforged Onyx Filament Perform Under High Heat?

3 Answers2025-07-28 13:10:36
I've been tinkering with 3D printing for years, and the Markforged Onyx filament is one of my go-to materials for high-heat applications. It holds up surprisingly well compared to standard nylon or PLA. The carbon fiber reinforcement gives it a higher heat deflection temperature, so parts don't warp or soften as quickly. I've used it for engine bay components in my car, and they withstand temperatures up to around 150°C without deforming. The surface finish stays smooth, and the layer adhesion is solid. It's not quite as heat-resistant as PEEK or Ultem, but for the price and printability, it's a fantastic middle ground.

Can Markforged Onyx Filament Be Used For Functional Parts?

3 Answers2025-07-28 20:36:23
I've been 3D printing for years, and let me tell you, Markforged Onyx filament is a beast for functional parts. It's not just about looks—this stuff is reinforced with chopped carbon fiber, making it way tougher than standard nylon. I've printed gears, brackets, and even drone parts that hold up under serious stress. The layer adhesion is insane, and the surface finish is smooth enough for moving parts. Compared to PLA or ABS, Onyx feels like upgrading from a bicycle to a motorcycle. It’s pricey, but if you need parts that won’t snap under pressure, it’s worth every penny. Just make sure your printer can handle high-temp materials, because this isn’t your average filament.
Galugarin at basahin ang magagandang nobela
Libreng basahin ang magagandang nobela sa GoodNovel app. I-download ang mga librong gusto mo at basahin kahit saan at anumang oras.
Libreng basahin ang mga aklat sa app
I-scan ang code para mabasa sa App
DMCA.com Protection Status