Select All And Delete In Vim

The command select all and delete in vim allows users to highlight the entire content of a file and remove it, streamlining editing workflows for scripts, dialogues, or subtitles in media production.
Wild Rose:My Dangerous Women
Wild Rose:My Dangerous Women
They are imperfect heroines, unwilling to compromise with gloomy lives. They grit their teeth to get out of their own way. They will become dazzling after completing fated and dangerous trials. “Wild Rose” Harrison Moore pleaded, his eyes turning red, "Do me a favor again. I promise it's the last time." I sneered and said, "If you want to convince me, drop to your knees." Then, this tall, strong man did kneel in front of me. However, his back remained upright. When he looked up at me, his taut jawline was especially attractive. I once took advantage of the drunkenness to kiss him on the jaw but was pushed away by him and fell to the floor. He chuckled and said, "Katherine, what's wrong with you? I'm your elder brother." I bit my lips awkwardly and wanted to flee, but he hooked his finger at me. "Take off your clothes. Is this all you can do?" “Lily” That woman ruined my family. So, to take revenge, I deliberately approached her brother. I lived in his house and tried hard to lure him. But he was so calm that he had never been disturbed. I could not help but sneer at him as I felt deeply depressed. However, after a long time, I cried. "I was a child at that time and was too naive." He responded slowly but his eyes were full of aggressivity. "You should pay for what you said, whether you were a little girl or not."
Belum ada penilaian
75 Bab
Let Me Go, Domineering Presidents
Let Me Go, Domineering Presidents
How does it feel to be loved by domineering presidents?There are millions of kinds of domineering presidents, but the most important thing for them is to give the female protagonists sweet and happy lives.In this multi-element novel, someone asked a domineering president to wash underwear, someone divorced a domineering president, and someone wanted to date a domineering president but was imprisoned...“Second Chance at Happiness”She just wanted to have a good relationship, but accidentally, she became the slave of the male protagonist, suffering all kinds of abuse. She finally learned the story behind his perversion and that her life was full of lies.“A Love as Deep as the Sea”One day, I drank too much, and I regarded my serious and abstinent boss, Joaquin Salvatore, as my first crush.When I woke up, I asked nervously, "Yesterday... We..."Joaquin replied, "What? Ms. Jobling, are you not going to be responsible for it?"I thought I was doomed and would be fired, but Joaquin said that he would give me a week's leave to rest.A week later, he circled me in a corner and asked, "I gave you a week. Have you figured out how to be responsible for me?"I was confused.
Belum ada penilaian
89 Bab
My Wonderful Boyfriend
My Wonderful Boyfriend
Those beautiful love stories happened in our youth.The boy in the next classroom wore white sneakers today. The ponytail of the smiling pretty girl swayed when she walked. The boy next door passed by the window after playing basketball...This is a story about youngsters having a crush, meeting their first love, and falling in passionate love.“Please Confess Your Love to Me”Maverick Xenos was my senior at the university.Before I knew him, he looked unapproachable to me. He even spoke with an air of mesmerizing aloofness.Then I found that this man was not what he seemed at all. I was fooled by his facade before ending up as his girlfriend.“I Got Three Boyfriends After My Amnesia”I lost my memory after a car accident, and then three men appeared who claimed to be my boyfriends.I looked at the reserved brainiac who was organizing my notes, the rebellious campus star who was peeling an apple for me, and the pure-hearted pretty boy who was giving me a massage.I was deep in thought.Couldn't I just live with the three of them?“Copper Heart”I spent nearly 1,000 dollars asking a policeman for his WhatsApp number.But he sternly refused. He even asked me if I was flirting with him to get back at my ex-boyfriend.He got me!Worse, my ex-boyfriend came to borrow money again.Before I could answer, the policeman stretched his wrists...
8
69 Bab
A Brave Jump to My Crush
A Brave Jump to My Crush
How can a young, cute man have bad intentions? He just wants to "warm your bed". Open it and experience a whirlwind romance. “I Slept With My Ex-boyfriend's Uncle” When I was drunk, I went to see my ex-boyfriend and tried to get back with him. But when I woke up, I found his uncle lying beside me. “A Brave Jump to My Crush” A love story between an aloof Prince Charming and a funny underachieving girl。 I had been in love with him for many years, and I finally went after him. On the night of our classmate reunion, I pretended to be drunk. I took his clothes off and tried to sleep with him. But I regretted it halfway through.
Belum ada penilaian
109 Bab
Falling in Love With A Cool Guy
Falling in Love With A Cool Guy
Sweet stories are coming. Be brave, and tell him how you feel. We hide in the lonely corners, watching those charming boys, but we don't know as long as we are brave enough, we can win their hearts. The handsome schoolboy, the abstinent professor, the cool genius... Who says that crush is fruitless? The pursuit of true love never goes out of style. “Falling in Love With A Cool Guy” My bestie's brother was a cool guy. When I met him for the first time, he went out of the bathroom and covered my head with a coat. Chelsea, my bestie tried to smooth things over. "This is my friend. Is she beautiful?" He looked at me coldly and said in a mean tone, "Ugly." Well, you might be a handful, but I knew how to deal with this type. I showed him my care and consideration for a long time. In the end, I gave up. He was still so arrogant that he didn't even call me sister. Two days after I gave up, he sent me the first message. Cool guy: [Are you playing hard to get?] “Love You Long Ago” I had a crush on Matthew, who was my neighbor, for a long time. One day, Matthew took the initiative to find me and introduced his younger brother to me. I smiled bitterly. Everyone knew that his half-brother was the person he hated the most. “Crush” I never thought this scene would appear in front of me. A tall man stood before me, holding the pink lingerie I had just taken off with his slender ring finger. My jeans were halfway also down my thighs.
Belum ada penilaian
55 Bab
Love You, Kill You (Female Edition)
Love You, Kill You (Female Edition)
These young girls are overwhelmed by complicated society, human relations, and accidents. What they faced are not only relationships but also the cruelty of the adult world. There are so many scumbags. Their boyfriends, husbands, and even their fathers may harm them. What should they do to survive? See how these young women will fight back. “I Am a Scorpio” Mark Yeager sent my private photos to his buddy. [Doesn't my girlfriend have a good figure?] The words were followed by two smug-looking emojis. His buddy replied: [I prefer women with flat chests.] I felt disgusted reading the message. Mark shrugged indifferently. "You are all women. Why are you afraid of her seeing your photo?" Yes, his buddy was a woman. I felt like an unreasonable and resentful woman. I had had enough. It was not something a Scorpio like me would do. This time, I did not want to put up with them anymore. “The Kiss of Karma” He blocked me with a fierce look and said, "So... Does what you said about being with me still hold up?" "Of course." I hugged Yorrance Sonic. "I really like you." I heard something falling to the ground with a bang as Yorrance waved to someone behind me. "Mom!" I turned around and saw my husband holding hands with a woman, whom Yorrance called "mom".
Belum ada penilaian
33 Bab

How Do I Use Sudo With Wq In Vim To Save Protected Files?

3 Jawaban2025-09-07 04:29:38

Totally hit this snag before — you open a file in vim, make your edits, and then bam: permission denied when you try to save. The neat little trick I use most often is this one-liner from inside vim: :w !sudo tee % >/dev/null

What that does is write the buffer to the sudoed 'tee' command, which will overwrite the original file as root. The % expands to the current filename, so the full flow is: vim hands the file contents to sudo tee, tee writes it with elevated rights, and the >/dev/null part hides the tee output so your buffer stays as-is. After that you can do :q to quit. I like this because it’s fast and doesn’t require reopening the file as root.

If you want a slightly cleaner approach, consider using sudoedit (sudo -e) to open files with your preferred editor as a temporary safe copy — it edits a temp file and then installs it as root, which is safer from a security perspective. For convenience I sometimes create a vim command or mapping, like cnoremap W!! w !sudo tee % >/dev/null, so typing :W!! saves without fuss. Also, if you frequently need root saves, the plugin 'sudo.vim' (provides commands like :SudoWrite) is worth installing. Each method has trade-offs: the tee trick is quick, sudoedit is safer, and opening vim with sudo from the start (sudo vim file) works but bypasses some safety models.

Which Materials Make The Most Durable Vim Wrench Models?

4 Jawaban2025-09-04 14:49:03

If I had to pick a short list right off the bat, I'd put chrome-vanadium and S2 tool steel at the top for most durable vim wrench models. Chrome-vanadium (Cr-V) is what you'll see on a lot of high-quality ratchets and hex sets—it balances hardness and toughness well, resists wear, and takes a nice finish. S2 is a shock-resisting tool steel that's common for bits and hex keys designed to take a lot of torque without snapping. For heavy, impact-style use, chrome-molybdenum (Cr-Mo) or 4140/6150 alloys are common because they absorb shocks better and can be heat-treated for high strength.

Finish and heat treatment matter as much as base alloy. Hardened and tempered tools in the HRC 52–62 range tend to last; too hard and they become brittle, too soft and they round off. Coatings like black oxide, phosphate, or nickel chrome help with corrosion; TiN or other nitriding can up wear resistance. In short: pick S2 or Cr-V for everyday durability, Cr-Mo for impact-duty, and pay attention to heat treatment and finish for real longevity. I tend to favor sets with solid forging and clear HRC specs—that’s saved me from snapping a hex at an awkward moment.

How Should I Maintain A Vim Wrench To Prevent Rust?

4 Jawaban2025-09-04 07:21:21

Honestly, I treat my tools a little like prized comics on a shelf — I handle them, clean them, and protect them so they last. When it comes to a vim wrench, the simplest habit is the most powerful: wipe it down after every use. I keep a small stash of lint-free rags and a bottle of light machine oil next to my bench. After I finish a job I wipe off grit and sweat, spray a little solvent if there’s grime, dry it, then apply a thin coat of oil with a rag so there’s no wet residue to attract rust.

For bits of surface rust that sneak in, I’ll use fine steel wool or a brass brush to take it off, then neutralize any remaining rust with a vinegar soak followed by a baking soda rinse if I’ve used acid. For long-term protection I like wax — a microcrystalline wax like Renaissance or even paste car wax gives a water-repellent layer that’s pleasantly invisible. If the wrench has moving parts, I disassemble and grease joints lightly and check for play.

Storage matters almost as much as treatment: a dry toolbox with silica gel packets, not left in a damp car or basement, keeps rust away. Little routines add up — a five-minute wipe and oil once a month will make that wrench feel like new for years.

Which Characters Define The Most Famous Vim Hempstead Series?

1 Jawaban2025-09-06 09:36:57

Huh — that name caught me off guard, but in the best way. I’m not spotting a widely known franchise called 'Vim Hempstead', so I’m guessing there might be a small typo or a niche indie series you’ve come across. Either way, I love these little mysteries, so I’ll walk through how I’d pick the characters that really define a ‘most famous’ series and give concrete examples from familiar titles so you can see the pattern. If you actually meant a specific book or comic, drop the exact title and I’ll map the characters precisely.

When fans say a series is defined by its characters, they usually mean a handful of roles that keep showing up: the stubborn, morally complex protagonist; the charismatic foil or rival; a mentor who shows the world’s rules; an antagonist who forces growth; and a small ensemble of friends who bring heart and humor. For instance, if we think of 'Mistborn', the defining pieces are Vin (the reluctant protagonist whose street-smarts and growth carry the arc), Kelsier (the larger-than-life mentor/rebel who shapes Vin’s worldview), Elend (the idealistic foil and eventual partner), the Lord Ruler (the pressing, mythic antagonist), and Sazed (the philosophic friend/keeper of wisdom). Swap in 'The Witcher' and you’ve got Geralt as the central, gruff moralist; Yennefer and Ciri as the catalytic figures who stretch his loyalties and purpose; and foes like the Wild Hunt or political conspirators who turn the scale. The pattern is consistent: one driving viewpoint character, one or two characters who challenge or complement them emotionally, a wise older figure or ideological counterpoint, and antagonists who test everything.

If you want a checklist to identify the defining characters of a series you’re curious about, here’s something I actually use when I’m arguing with friends in forums: (1) Who the fans talk about most — that’s your protagonist; (2) Who changes the protagonist’s trajectory the most — that’s your catalyst or mentor; (3) Who embodies the series’ themes — often a secondary lead or antagonist; (4) Who provides emotional or comedic ballast — a friend or ensemble member; and (5) Who’s responsible for the central conflict — the antagonist or system. So, if your 'Vim Hempstead' reference points to a lesser-known indie series, run through that checklist and you’ll likely land on the five or six names that define it. If you were aiming at a specific series like 'Mistborn' or 'The Witcher' (or even something wildly different), tell me and I’ll list the core characters and why each one is essential — I get a kick out of these character dissections and swapping hot takes over coffee or late-night forum scrolls.

How Do You Install Plugins In M Vim On MacOS?

4 Jawaban2025-09-03 18:14:39

If you're running MacVim (the mvim command) on macOS, the simplest, most reliable route for me has been vim-plug. It just feels clean: drop a tiny bootstrap file into ~/.vim/autoload, add a few lines to ~/.vimrc, then let the plugin manager handle the rest. For vim-plug I run: curl -fLo ~/.vim/autoload/plug.vim --create-dirs https://raw.githubusercontent.com/junegunn/vim-plug/master/plug.vim. After that I edit ~/.vimrc and add:

call plug#begin('~/.vim/plugged')
Plug 'tpope/vim-sensible'
Plug 'junegunn/fzf', { 'do': { -> fzf#install() } }
call plug#end()

Then I launch MacVim with mvim and run :PlugInstall (or from the shell mvim +PlugInstall +qall) and watch the plugins clone and install. A few handy things: if a plugin needs build steps, check its README; some require ctags, ripgrep, or Python support. Also remember MacVim reads your ~/.vimrc (and you can put GUI tweaks in ~/.gvimrc). If you prefer built-in package management, the pack/start method works too: mkdir -p ~/.vim/pack/vendor/start && git clone ~/.vim/pack/vendor/start/, then restart mvim.

How Does M Vim Compare To Neovim For Plugins?

4 Jawaban2025-09-03 18:19:40

Okay, here’s the short version first, but then I’ll expand — I love geeking out about editor choices. For plugins, Neovim is the one that pushed the ecosystem forward: it brought a clean RPC-based plugin model, first-class async job handling, and a modern Lua API that plugin authors love. That means a lot of recent plugins are written in Lua or expect Neovim-only features like virtual text, floating windows, and extmarks. The result is snappier, more feature-rich plugins that can do things without blocking the UI.

If you use 'm vim' (think classic Vim or MacVim builds), you still get a massive, mature plugin ecosystem. Many plugin authors keep compatibility with Vim, and core functionality works fine — but some newer plugins either require extra patches, rely on Vim being compiled with specific features (job control, Python/Ruby/Node support), or are Neovim-only because they use the Lua or RPC APIs. Practically, that means your favorite long-lived plugins like statuslines, file explorers, and linters usually work on either, but cutting-edge integrations (native LSP clients, modern completion engines written in Lua) will feel more at home in Neovim.

My take: if you want modern plugins, async performance, and future-facing features, Neovim wins. If you prefer a familiar Vim experience, GUI comforts on macOS, or rely on plugins that haven’t migrated, 'm vim' still serves well. I ended up switching because I wanted Lua-based configs and non-blocking LSP, but I still keep a light Vim profile around for quick GUI sessions.

What Are The Best Startup Optimizations For M Vim?

5 Jawaban2025-09-03 05:08:31

Oh wow, trimming 'mvim' startup is one of those tiny joys that makes the whole day smoother. I usually start by profiling so I know what's actually slow: run mvim --startuptime ~/vim-startup.log and open that log. It quickly shows which scripts or plugins dominate time. Once I know the culprits, I move heavy things into autoload or optional plugin folders so they only load when needed.

Next, I use lazy-loading with a plugin manager like 'vim-plug' (Plug 'foo', { 'on': 'SomeCommand' } or 'for': ['python', 'javascript']). Put plugins you need immediately in 'start' and everything else in 'opt' or load by filetype. Also disable unnecessary providers (let g:loaded_python_provider = 0, let g:loaded_ruby_provider = 0) if you don't use them — that shave off seconds. Finally, keep UI tweaks minimal for GUI start: font fallback, complex statuslines and external helpers (like large LSPs) can wait until you open a project. After a few iterations of profile → defer → test, 'mvim' feels snappy and more pleasant to use.

Does M In Vim Support Digits Or Special Mark Names?

5 Jawaban2025-09-03 01:44:27

Oh, this one used to confuse me too — Vim's mark system is a little quirky if you come from editors with numbered bookmarks. The short practical rule I use now: the m command only accepts letters. So m followed by a lowercase letter (ma, mb...) sets a local mark in the current file; uppercase letters (mA, mB...) set marks that can point to other files too.

Digits and the special single-character marks (like '.', '^', '"', '[', ']', '<', '>') are not something you can create with m. Those numeric marks ('0 through '9) and the special marks are managed by Vim itself — they record jumps, last change, insert position, visual selection bounds, etc. You can jump to them with ' or ` but you can't set them manually with m.

If you want to inspect what's set, :marks is your friend; :delmarks removes marks. I often keep a tiny cheat sheet pasted on my wall: use lowercase for local spots, uppercase for file-spanning marks, and let Vim manage the numbered/special ones — they’re there for navigation history and edits, not manual bookmarking.

Why Is Vim Auto-Indent Not Working After Vimrc Changes?

4 Jawaban2025-09-04 02:43:46

Man, that frustration is so real — I’ve been there. First thing I do is check whether vim even thinks it should indent: open the file and run :set filetype? and :verbose set autoindent. If filetype is empty or wrong, indent scripts won’t run. If :verbose shows autoindent being turned off by some script, that points to the culprit.

Next, consider obvious toggles that silently kill indentation: if you’ve got 'set paste' enabled (or you toggled paste mode earlier with a mapping), indentation won’t behave. Also check whether you disabled 'autoindent', 'smartindent', or 'cindent' by mistake. Use :set paste? and :set autoindent? to inspect current state.

If those look fine, source your vimrc manually (:source ~/.vimrc) and watch :messages for errors — a syntax error early in the file can stop the rest of the config from loading, so later indent settings never get applied. Also run vim -u NONE (or nvim -u NORC) to see if a vanilla session indents correctly; if it does, a plugin or a line in your vimrc is to blame. Useful commands: :scriptnames (shows loaded scripts), :verbose set shiftwidth? tabstop? expandtab? and checking ~/.vim/indent or plugin ftplugin files for overrides. If you want, paste the problematic snippet and I’ll poke at it with you.

How To Write And Quit Vim Without Saving Changes?

3 Jawaban2025-08-08 23:17:55

I remember the first time I used vim and couldn't figure out how to exit without saving. It was frustrating, but I learned the hard way. To quit vim without saving changes, you need to press the 'Esc' key first to ensure you're in command mode. Then, type ':q!' and hit 'Enter'. The ':q' part tells vim to quit, and the '!' forces it to discard any unsaved changes. It's a lifesaver when you accidentally mess up a file and just want to bail. I've used this countless times when testing configurations or editing scripts I didn't mean to alter.

Jelajahi dan baca novel bagus secara gratis
Akses gratis ke berbagai novel bagus di aplikasi GoodNovel. Unduh buku yang kamu suka dan baca di mana saja & kapan saja.
Baca buku gratis di Aplikasi
Pindai kode untuk membaca di Aplikasi
DMCA.com Protection Status