Library

Cream Vim

It's my first day undercover at my future husband's dessert shop, and chaos walks in with fake lashes and two-inch nails. "I want an ice cream. Heated." I paused. "Just checking... You want your ice cream hot?" She gave me a look like I'd failed kindergarten. "Yes. Hot ice cream. Are you slow?" Deep breath. Zen mode. Customer-first service smile. "I'm sorry, ma'am. Ice cream has to stay frozen, or it just turns into—well... milk. If you want something warm, we have hot tea or coffee." "I'm pregnant!" she screeched. "Pregnant women crave weird things! Plus, my doctor said I can't eat anything cold! Are you trying to kill my baby and me? Is that what this is?!" People started turning their heads. Fantastic. A whole audience. I kept my voice low. "Ma'am, I can refund you." She suddenly smacked the counter, knocking the scanner sideways. Her nails shot past my face like tiny knives. "What kind of attitude is that?! A pathetic cashier talking back to me? I'll call my husband and get you fired!" Then, she leaned in like she was about to reveal a royal bloodline. "Guess what? I'm the boss's wife." I blinked. If that was true, I really needed to stop thinking about helping my boyfriend to open 3,000 franchise stores.

7 Chapters

Reborn to Rise

The human world had been taken over by vampires and werewolves. My noble parents wanted to please them, so they married me and their adopted daughter, Sophie, to them separately. In my last life, Sophie chose the strong and loyal werewolf. I chose the graceful and noble vampire. But on a full moon night, the werewolf in heat tore Sophie apart. Meanwhile, I gained eternal life after going through the vampire's Embrace. My parents wanted revenge for Sophie, so they drugged me and sent me to the werewolf's bed, where I was bitten and died. When I opened my eyes again, I was back on the day we drew lots for marriage. This time, Sophie knocked over the lot box and sweetly said she wanted to marry the vampire. "Anna, it's my turn to live forever." I didn't object and accepted the vicious werewolf. In this new life, Sophie was still so foolish. She thought she could be happy by relying on a man. However, what I wanted was to save all of humanity.

8 Chapters

I MARRIED A DISABLED BILLIONAIRE

“But why do I have to marry him? He was promised to Whitney, not me. I don't even love him”, I said, hoping Mom would understand. “This is not about your feelings Charlotte. It's about saving the family name from shame. You will marry Josh Xavier to save our family from shame. The reputation of this family is more important than your emotions,” Mom said, and Whitney stifled her laughter. Charlotte McCartney is the younger daughter of Mrs Ashley McCartney. She is also the least favorite daughter of her mother. Her sister Whitney McCartney steals her boyfriend and her mother forces her to marry Josh Xavier, an older man who was betrothed to her sister Whitney McCartney for his money. Josh Xavier is Whitney McCartney’s ex-boyfriend. He is involved in a car accident which leaves him crippled. As a result, his girlfriend Whitney McCartney breaks up with him, and he becomes a bitter man determined to make the life of his new wife miserable. But how long can he keep this up?

123 Chapters

A Promise He Never Kept

When my parents call to tell me they are taking me to my childhood friend, Oliver Holland's house to meet his blind date, he is still asleep beside me. I think they are joking and whisper, "Oliver, they said they've found you someone to date." He gives a lazy hum and pulls me into his arms. "Gerry, help me pick out something to wear later. And fix my hair, too." When I freeze, Oliver opens his eyes and lets out a short, mocking laugh. "What's wrong with you? We're just sleeping together. You don't actually think I'm going to marry you, do you?"

10 Chapters

Face My Wrath

I give birth to my child after accepting a sperm donation. Later, my CEO husband passes away due to an illness. After I take over the company, I take five years to strike a balance between work and caring for my daughter. On her birthday, a shrew makes me out to be a mistress. "Look at how scantily clad you are—you're doing it to seduce my husband, aren't you?" I explain that I'm single, but she slaps me and snarls, "How dare you claim to be single! Your daughter looks just like my husband! I'll show you today what the consequences of wrecking someone's family are!" She drags me away like I'm a dog before the kindergarten's entrance as my daughter watches. The shrew isn't satisfied with that. She laughs cruelly and says, "I'll show your daughter what a shameless woman you are." Then, she throws herself into a man's arms. "How are you going to reward me for getting rid of a woman who thinks she can have you after having your child, honey?" I look up to see the doctor who helped me with my test tube baby back in the day. He's now my subordinate.

8 Chapters

My Husband Regrets Marrying His Assistant

My fiance, Alexander Elrod, the most outstanding fashion designer of the 21st century, had finally agreed to marry me. He promised to propose once he won the Paris Fashion Award. When the day arrived, I braved a typhoon to attend his celebration banquet. There, I watched as Alexander and his assistant, Stella Monroe, kissed shamelessly in front of the cameras. Then, they proudly displayed their wedding rings. Alexander picked up the microphone. “Stella dear, thank you for your hard work during this time. In the future, I’ll continue leading the fashion world with you, one trend after another!” My colleagues all turned to look at me and expected me to cause a scene. I smiled, and I was the first to applaud them. “How wonderful! Wishing you two a lifetime of happiness.” The room erupted in shocked murmurs. After the event, Alexander immediately dragged me aside to explain, “Stella stayed up with me for nearly half a year for the Paris Fashion Award. Her mother’s terminally ill, and her last wish was to see Stella get married. Must you take it so seriously? “Once work is over, I’ll divorce her and throw you the grandest wedding, okay?” I walked away without answering him. Then, I gave my father a call. “Dad, the ten-year bet is over. I’ve lost. I’ll come home and take over the family business.”

10 Chapters

What Are The Side Effects Of Largo Cream In Pakistan?

5 Answers2025-09-22 18:57:15

Largo cream has been the talk of many forums lately, especially among those looking for a more even skin tone. I recall a friend of mine who was really excited to try it after seeing some promising results online. However, she faced a few side effects that made her reconsider its use. First off, it can cause skin irritation for some users, especially if they have sensitive skin. A few days into using the cream, she complained of redness and a slight burning sensation. It really put her off, and she had to stop using it.

Besides irritation, Largo cream may lead to hyperpigmentation if overused. My friend initially applied it liberally, hoping for quicker results. Sadly, this misstep backfired; she developed dark patches that she now has to remedy with other products! This has taught me the importance of following usage instructions closely.

While some people claim to have had good results, it's crucial to remember that everyone’s skin reacts differently. Adverse effects such as acne flare-ups or even allergic reactions can occur. So, thorough research and consulting a dermatologist beforehand can go a long way. It’s just fascinating how one product can affect different people in such varied ways, isn't it?

How Do I Use Sudo With Wq In Vim To Save Protected Files?

3 Answers2025-09-07 04:29:38

Totally hit this snag before — you open a file in vim, make your edits, and then bam: permission denied when you try to save. The neat little trick I use most often is this one-liner from inside vim: :w !sudo tee % >/dev/null

What that does is write the buffer to the sudoed 'tee' command, which will overwrite the original file as root. The % expands to the current filename, so the full flow is: vim hands the file contents to sudo tee, tee writes it with elevated rights, and the >/dev/null part hides the tee output so your buffer stays as-is. After that you can do :q to quit. I like this because it’s fast and doesn’t require reopening the file as root.

If you want a slightly cleaner approach, consider using sudoedit (sudo -e) to open files with your preferred editor as a temporary safe copy — it edits a temp file and then installs it as root, which is safer from a security perspective. For convenience I sometimes create a vim command or mapping, like cnoremap W!! w !sudo tee % >/dev/null, so typing :W!! saves without fuss. Also, if you frequently need root saves, the plugin 'sudo.vim' (provides commands like :SudoWrite) is worth installing. Each method has trade-offs: the tee trick is quick, sudoedit is safer, and opening vim with sudo from the start (sudo vim file) works but bypasses some safety models.

Which Materials Make The Most Durable Vim Wrench Models?

4 Answers2025-09-04 14:49:03

If I had to pick a short list right off the bat, I'd put chrome-vanadium and S2 tool steel at the top for most durable vim wrench models. Chrome-vanadium (Cr-V) is what you'll see on a lot of high-quality ratchets and hex sets—it balances hardness and toughness well, resists wear, and takes a nice finish. S2 is a shock-resisting tool steel that's common for bits and hex keys designed to take a lot of torque without snapping. For heavy, impact-style use, chrome-molybdenum (Cr-Mo) or 4140/6150 alloys are common because they absorb shocks better and can be heat-treated for high strength.

Finish and heat treatment matter as much as base alloy. Hardened and tempered tools in the HRC 52–62 range tend to last; too hard and they become brittle, too soft and they round off. Coatings like black oxide, phosphate, or nickel chrome help with corrosion; TiN or other nitriding can up wear resistance. In short: pick S2 or Cr-V for everyday durability, Cr-Mo for impact-duty, and pay attention to heat treatment and finish for real longevity. I tend to favor sets with solid forging and clear HRC specs—that’s saved me from snapping a hex at an awkward moment.

How Should I Maintain A Vim Wrench To Prevent Rust?

4 Answers2025-09-04 07:21:21

Honestly, I treat my tools a little like prized comics on a shelf — I handle them, clean them, and protect them so they last. When it comes to a vim wrench, the simplest habit is the most powerful: wipe it down after every use. I keep a small stash of lint-free rags and a bottle of light machine oil next to my bench. After I finish a job I wipe off grit and sweat, spray a little solvent if there’s grime, dry it, then apply a thin coat of oil with a rag so there’s no wet residue to attract rust.

For bits of surface rust that sneak in, I’ll use fine steel wool or a brass brush to take it off, then neutralize any remaining rust with a vinegar soak followed by a baking soda rinse if I’ve used acid. For long-term protection I like wax — a microcrystalline wax like Renaissance or even paste car wax gives a water-repellent layer that’s pleasantly invisible. If the wrench has moving parts, I disassemble and grease joints lightly and check for play.

Storage matters almost as much as treatment: a dry toolbox with silica gel packets, not left in a damp car or basement, keeps rust away. Little routines add up — a five-minute wipe and oil once a month will make that wrench feel like new for years.

How Do You Install Plugins In M Vim On MacOS?

4 Answers2025-09-03 18:14:39

If you're running MacVim (the mvim command) on macOS, the simplest, most reliable route for me has been vim-plug. It just feels clean: drop a tiny bootstrap file into ~/.vim/autoload, add a few lines to ~/.vimrc, then let the plugin manager handle the rest. For vim-plug I run: curl -fLo ~/.vim/autoload/plug.vim --create-dirs https://raw.githubusercontent.com/junegunn/vim-plug/master/plug.vim. After that I edit ~/.vimrc and add:

call plug#begin('~/.vim/plugged')
Plug 'tpope/vim-sensible'
Plug 'junegunn/fzf', { 'do': { -> fzf#install() } }
call plug#end()

Then I launch MacVim with mvim and run :PlugInstall (or from the shell mvim +PlugInstall +qall) and watch the plugins clone and install. A few handy things: if a plugin needs build steps, check its README; some require ctags, ripgrep, or Python support. Also remember MacVim reads your ~/.vimrc (and you can put GUI tweaks in ~/.gvimrc). If you prefer built-in package management, the pack/start method works too: mkdir -p ~/.vim/pack/vendor/start && git clone ~/.vim/pack/vendor/start/, then restart mvim.

How Does M Vim Compare To Neovim For Plugins?

4 Answers2025-09-03 18:19:40

Okay, here’s the short version first, but then I’ll expand — I love geeking out about editor choices. For plugins, Neovim is the one that pushed the ecosystem forward: it brought a clean RPC-based plugin model, first-class async job handling, and a modern Lua API that plugin authors love. That means a lot of recent plugins are written in Lua or expect Neovim-only features like virtual text, floating windows, and extmarks. The result is snappier, more feature-rich plugins that can do things without blocking the UI.

If you use 'm vim' (think classic Vim or MacVim builds), you still get a massive, mature plugin ecosystem. Many plugin authors keep compatibility with Vim, and core functionality works fine — but some newer plugins either require extra patches, rely on Vim being compiled with specific features (job control, Python/Ruby/Node support), or are Neovim-only because they use the Lua or RPC APIs. Practically, that means your favorite long-lived plugins like statuslines, file explorers, and linters usually work on either, but cutting-edge integrations (native LSP clients, modern completion engines written in Lua) will feel more at home in Neovim.

My take: if you want modern plugins, async performance, and future-facing features, Neovim wins. If you prefer a familiar Vim experience, GUI comforts on macOS, or rely on plugins that haven’t migrated, 'm vim' still serves well. I ended up switching because I wanted Lua-based configs and non-blocking LSP, but I still keep a light Vim profile around for quick GUI sessions.

What Are The Best Startup Optimizations For M Vim?

5 Answers2025-09-03 05:08:31

Oh wow, trimming 'mvim' startup is one of those tiny joys that makes the whole day smoother. I usually start by profiling so I know what's actually slow: run mvim --startuptime ~/vim-startup.log and open that log. It quickly shows which scripts or plugins dominate time. Once I know the culprits, I move heavy things into autoload or optional plugin folders so they only load when needed.

Next, I use lazy-loading with a plugin manager like 'vim-plug' (Plug 'foo', { 'on': 'SomeCommand' } or 'for': ['python', 'javascript']). Put plugins you need immediately in 'start' and everything else in 'opt' or load by filetype. Also disable unnecessary providers (let g:loaded_python_provider = 0, let g:loaded_ruby_provider = 0) if you don't use them — that shave off seconds. Finally, keep UI tweaks minimal for GUI start: font fallback, complex statuslines and external helpers (like large LSPs) can wait until you open a project. After a few iterations of profile → defer → test, 'mvim' feels snappy and more pleasant to use.

Does M In Vim Support Digits Or Special Mark Names?

5 Answers2025-09-03 01:44:27

Oh, this one used to confuse me too — Vim's mark system is a little quirky if you come from editors with numbered bookmarks. The short practical rule I use now: the m command only accepts letters. So m followed by a lowercase letter (ma, mb...) sets a local mark in the current file; uppercase letters (mA, mB...) set marks that can point to other files too.

Digits and the special single-character marks (like '.', '^', '"', '[', ']', '<', '>') are not something you can create with m. Those numeric marks ('0 through '9) and the special marks are managed by Vim itself — they record jumps, last change, insert position, visual selection bounds, etc. You can jump to them with ' or ` but you can't set them manually with m.

If you want to inspect what's set, :marks is your friend; :delmarks removes marks. I often keep a tiny cheat sheet pasted on my wall: use lowercase for local spots, uppercase for file-spanning marks, and let Vim manage the numbered/special ones — they’re there for navigation history and edits, not manual bookmarking.

Which Characters Define The Most Famous Vim Hempstead Series?

1 Answers2025-09-06 09:36:57

Huh — that name caught me off guard, but in the best way. I’m not spotting a widely known franchise called 'Vim Hempstead', so I’m guessing there might be a small typo or a niche indie series you’ve come across. Either way, I love these little mysteries, so I’ll walk through how I’d pick the characters that really define a ‘most famous’ series and give concrete examples from familiar titles so you can see the pattern. If you actually meant a specific book or comic, drop the exact title and I’ll map the characters precisely.

When fans say a series is defined by its characters, they usually mean a handful of roles that keep showing up: the stubborn, morally complex protagonist; the charismatic foil or rival; a mentor who shows the world’s rules; an antagonist who forces growth; and a small ensemble of friends who bring heart and humor. For instance, if we think of 'Mistborn', the defining pieces are Vin (the reluctant protagonist whose street-smarts and growth carry the arc), Kelsier (the larger-than-life mentor/rebel who shapes Vin’s worldview), Elend (the idealistic foil and eventual partner), the Lord Ruler (the pressing, mythic antagonist), and Sazed (the philosophic friend/keeper of wisdom). Swap in 'The Witcher' and you’ve got Geralt as the central, gruff moralist; Yennefer and Ciri as the catalytic figures who stretch his loyalties and purpose; and foes like the Wild Hunt or political conspirators who turn the scale. The pattern is consistent: one driving viewpoint character, one or two characters who challenge or complement them emotionally, a wise older figure or ideological counterpoint, and antagonists who test everything.

If you want a checklist to identify the defining characters of a series you’re curious about, here’s something I actually use when I’m arguing with friends in forums: (1) Who the fans talk about most — that’s your protagonist; (2) Who changes the protagonist’s trajectory the most — that’s your catalyst or mentor; (3) Who embodies the series’ themes — often a secondary lead or antagonist; (4) Who provides emotional or comedic ballast — a friend or ensemble member; and (5) Who’s responsible for the central conflict — the antagonist or system. So, if your 'Vim Hempstead' reference points to a lesser-known indie series, run through that checklist and you’ll likely land on the five or six names that define it. If you were aiming at a specific series like 'Mistborn' or 'The Witcher' (or even something wildly different), tell me and I’ll list the core characters and why each one is essential — I get a kick out of these character dissections and swapping hot takes over coffee or late-night forum scrolls.

Why Is Vim Auto-Indent Not Working After Vimrc Changes?

4 Answers2025-09-04 02:43:46

Man, that frustration is so real — I’ve been there. First thing I do is check whether vim even thinks it should indent: open the file and run :set filetype? and :verbose set autoindent. If filetype is empty or wrong, indent scripts won’t run. If :verbose shows autoindent being turned off by some script, that points to the culprit.

Next, consider obvious toggles that silently kill indentation: if you’ve got 'set paste' enabled (or you toggled paste mode earlier with a mapping), indentation won’t behave. Also check whether you disabled 'autoindent', 'smartindent', or 'cindent' by mistake. Use :set paste? and :set autoindent? to inspect current state.

If those look fine, source your vimrc manually (:source ~/.vimrc) and watch :messages for errors — a syntax error early in the file can stop the rest of the config from loading, so later indent settings never get applied. Also run vim -u NONE (or nvim -u NORC) to see if a vanilla session indents correctly; if it does, a plugin or a line in your vimrc is to blame. Useful commands: :scriptnames (shows loaded scripts), :verbose set shiftwidth? tabstop? expandtab? and checking ~/.vim/indent or plugin ftplugin files for overrides. If you want, paste the problematic snippet and I’ll poke at it with you.