Which Vim Tools Are Best For Manga Scriptwriters?

Totally hit this snag before — you open a file in vim, make your edits, and then bam: permission denied when you try to save. The neat little trick I use most often is this one-liner from inside vim: :w !sudo tee % >/dev/null What that does is write the buffer to the sudoed 'tee' command, which will overwrite the original file as root. The % expands to the current filename, so the full flow is: vim hands the file contents to sudo tee, tee writes it with elevated rights, and the >/dev/null part hides the tee output so your buffer stays as-is. After that you can do :q to quit. I like this because it’s fast and doesn’t require reopening the file as root. If you want a slightly cleaner approach, consider using sudoedit (sudo -e) to open files with your preferred editor as a temporary safe copy — it edits a temp file and then installs it as root, which is safer from a security perspective. For convenience I sometimes create a vim command or mapping, like cnoremap W!! w !sudo tee % >/dev/null, so typing :W!! saves without fuss. Also, if you frequently need root saves, the plugin 'sudo.vim' (provides commands like :SudoWrite) is worth installing. Each method has trade-offs: the tee trick is quick, sudoedit is safer, and opening vim with sudo from the start (sudo vim file) works but bypasses some safety models.

If you want a no-fuss way to merge PDFs on the command line, I usually reach for small, dedicated tools first because they do exactly one thing well. On Linux or macOS, 'pdfunite' (part of Poppler) is the simplest: pdfunite file1.pdf file2.pdf merged.pdf — done. If you need more control, 'pdftk' is ancient but powerful: pdftk a=first.pdf b=second.pdf cat a b output merged.pdf, and it supports page ranges like a1-3 b2-5. Both commands are fast, scriptable, and safe for preserving vector content and text. When I need advanced compression, metadata tweaks, or to repair weird PDFs, I switch to Ghostscript: gs -dBATCH -dNOPAUSE -q -sDEVICE=pdfwrite -sOutputFile=merged.pdf file1.pdf file2.pdf. You can also add -dPDFSETTINGS=/ebook or /screen to reduce size. On Windows I often use WSL or a native build for these tools. For quick concatenation with modern behavior, qpdf works great: qpdf --empty --pages file1.pdf file2.pdf -- merged.pdf. Each tool has trade-offs (speed vs features vs size), so I pick one depending on whether I care about bookmarks, compression, or fixing broken files.

Oh man, I love talking tools — especially when they save me time and don’t cost a dime. For converting PDF to EPUB with free open-source software, my go-to is Calibre. It’s a full-fledged e-book manager that includes the 'ebook-convert' command-line tool and a friendly GUI. For many PDFs, just drag-and-drop into Calibre’s GUI and pick 'Convert books' → EPUB; for terminal lovers, ebook-convert input.pdf output.epub often does the trick. Calibre tries to preserve metadata and can generate a table of contents, but complex layouts or multi-column PDFs sometimes need cleanup afterward. If the PDF is more like a scanned image (no embedded text), I usually run OCR first using 'ocrmypdf' which wraps Tesseract. That gives real selectable text you can feed into Pandoc or Calibre. Another pipeline I use for stubborn PDFs is 'pdf2htmlEX' (or Poppler’s pdftohtml) to convert to HTML, then 'pandoc' to turn the HTML into EPUB: pdf2htmlEX file.pdf file.html && pandoc file.html -o file.epub. It’s a little fiddly but often yields better reflow for text-heavy books. Finally, if I want to tweak the EPUB by hand, I open it with 'Sigil' — a solid open-source EPUB editor — to fix cover art, chapter breaks, or stray tags. For validation, 'epubcheck' is invaluable. Heads-up: DRM’d PDFs are a different beast, and no legitimate open-source tool will break DRM for you. But for regular DRM-free PDFs, Calibre, Pandoc plus pdf2htmlEX, Sigil, and OCRmyPDF form a great free toolkit.

If I had to pick a short list right off the bat, I'd put chrome-vanadium and S2 tool steel at the top for most durable vim wrench models. Chrome-vanadium (Cr-V) is what you'll see on a lot of high-quality ratchets and hex sets—it balances hardness and toughness well, resists wear, and takes a nice finish. S2 is a shock-resisting tool steel that's common for bits and hex keys designed to take a lot of torque without snapping. For heavy, impact-style use, chrome-molybdenum (Cr-Mo) or 4140/6150 alloys are common because they absorb shocks better and can be heat-treated for high strength. Finish and heat treatment matter as much as base alloy. Hardened and tempered tools in the HRC 52–62 range tend to last; too hard and they become brittle, too soft and they round off. Coatings like black oxide, phosphate, or nickel chrome help with corrosion; TiN or other nitriding can up wear resistance. In short: pick S2 or Cr-V for everyday durability, Cr-Mo for impact-duty, and pay attention to heat treatment and finish for real longevity. I tend to favor sets with solid forging and clear HRC specs—that’s saved me from snapping a hex at an awkward moment.

Honestly, I treat my tools a little like prized comics on a shelf — I handle them, clean them, and protect them so they last. When it comes to a vim wrench, the simplest habit is the most powerful: wipe it down after every use. I keep a small stash of lint-free rags and a bottle of light machine oil next to my bench. After I finish a job I wipe off grit and sweat, spray a little solvent if there’s grime, dry it, then apply a thin coat of oil with a rag so there’s no wet residue to attract rust. For bits of surface rust that sneak in, I’ll use fine steel wool or a brass brush to take it off, then neutralize any remaining rust with a vinegar soak followed by a baking soda rinse if I’ve used acid. For long-term protection I like wax — a microcrystalline wax like Renaissance or even paste car wax gives a water-repellent layer that’s pleasantly invisible. If the wrench has moving parts, I disassemble and grease joints lightly and check for play. Storage matters almost as much as treatment: a dry toolbox with silica gel packets, not left in a damp car or basement, keeps rust away. Little routines add up — a five-minute wipe and oil once a month will make that wrench feel like new for years.

Wow, converting ebooks turned into a tiny obsession for me — once you start testing layouts on different devices you notice all the small things that break. For straight-up .mobi conversion I usually reach for Calibre first because it’s insanely flexible: you can bulk-convert EPUB to MOBI, tweak metadata, edit the table of contents, and even run the conversion from the command line with ebook-convert when I want to script batches. It’s not perfect for the newest Kindle features, though — the MOBI Calibre produces is the older Mobipocket-style file, so be cautious if you need KF8/KFX capabilities. For previewing and sanity-checking, 'Kindle Previewer' is my safety net. It simulates multiple Kindle devices and will convert an EPUB into a Kindle-ready file so I can see how images, fonts, and the TOC behave. When I want a polished interior or am preparing a manuscript for Kindle Direct Publishing I often open the EPUB in Sigil to fine-tune HTML, or run it through 'Kindle Create' if the book has many images or needs nicer chapter styling — 'Kindle Create' is great for a more WYSIWYG approach but less flexible than Sigil or Calibre. If my source is Markdown, Pandoc is a gem: markdown → EPUB → check with Sigil/Calibre → preview in 'Kindle Previewer'. For quick, private conversions I avoid online converters; for one-off convenience, services like Zamzar exist but I’m picky about uploading drafts. Final tip: always test on actual Kindle devices or at least 'Kindle Previewer', check the TOC, image placement, and hyphenation, and if you’re publishing on KDP prefer uploading EPUB (or KPF from 'Kindle Create') rather than relying on ancient MOBI toolchains — it saves messy surprises.

When I’m trying to find a specific anime-related book by its ISBN, I rely on a mix of online tools and apps that make the process super smooth. One of my go-to platforms is Goodreads. It’s not just for reviews—you can punch in the ISBN, and it’ll pull up the exact title, whether it’s a manga adaptation or a light novel. I also use WorldCat, which is like a global library catalog. It’s perfect for finding rare or out-of-print anime books that might not pop up on mainstream sites. Another tool I swear by is BookFinder. It’s a search engine that scours multiple online retailers and secondhand shops. I’ve found some hidden gems this way, like limited-edition art books from 'Attack on Titan' or collector’s editions of 'My Hero Academia' novels. For mobile convenience, I use the Libib app. It lets me scan ISBNs with my phone’s camera, and it’s great for organizing my personal collection. Lastly, I always check Amazon and Barnes & Noble. Even if I don’t buy from them, their databases are super detailed, often including previews or related recommendations. These tools have saved me so much time, especially when I’m hunting for something specific like the 'Demon Slayer' light novels or the 'One Piece' manga box sets.

Alright, if you’ve got a PDF plan for a little free library and you want to bring it to life, here’s the practical toolkit I always grab before starting. I start with the basics: tape measure (a 25-foot one), a good carpenter’s pencil, a speed square, and a combination square for right angles. For cutting and shaping I usually use a circular saw for straight cuts, a jigsaw for window and trim cuts, and a handsaw for small adjustments. A power drill/driver with a set of bits (including a countersink bit) is indispensable; I also keep an impact driver handy for stubborn screws. Clamps are a real sanity-saver — a couple of bar clamps and some quick-grip clamps. Sanding: orbital sander plus some sandpaper in 80/120/220 grit. On the materials and hardware side, I plan for exterior plywood or cedar boards, exterior-grade wood glue, stainless exterior screws, a waterproof hinge for the door, a magnetic or simple latch, and a clear plexiglass or polycarbonate panel for a window. Safety gear: eye protection, dust mask or respirator, hearing protection, and gloves. For finishing: exterior primer, exterior latex paint or spar urethane, painter’s tape, and a brush or roller. When working from a PDF, I print at 100% scale (or use tile printing) so templates match real sizes, double-check dimensions with the plan, and trace full-size pieces onto the wood when needed. I also bring a tablet with the PDF open so I can zoom in on joinery details while I work. Little tips: predrill screw holes to avoid splitting, test-fit before gluing, and keep an extra box of screws — they save me every time. It’s a small project that makes a big neighborhood smile, and I always find some way to personalize the roof or paint job before calling it done.