Can I Visit Dolley Madison Library After 8 PM?

I still get a little excited talking about streaming mysteries, but to keep it short and clear: 'Young Sheldon' is not part of the Netflix US library. If you try to find it on Netflix in the United States, you won’t see it pop up because the streaming rights in the U.S. are held by the network/parent-company platforms and digital storefronts instead. That said, the show does land on Netflix in several countries outside the U.S. — streaming licensing is weird and regional, so Netflix’s catalog varies wildly by territory. If you’re in the U.S. and want to watch, the reliable ways are the original broadcaster’s streaming options or buying episodes/seasons on services like Amazon, iTunes, or other digital retailers. You can also check physical copies if you like owning discs. For anyone who’s impatient like me, the fastest way to confirm is to search Netflix directly or use a service like JustWatch to see current availability. Personally, I ended up buying a digital season because it was the quickest binge route, and I still laugh at how young that character is compared to the older cast — feels like a neat little time capsule.

The BKLYN Library hosts a wide range of programs including literacy classes, author talks, art workshops, technology training, and community events. It offers English language courses, early literacy sessions for children, and job readiness workshops for adults. Many events are free and open to the public, reflecting the library’s mission to support education, culture, and community engagement.

I get excited whenever people ask about this — yes, students can often request manuscript scans from the Lilly Library at Indiana University, but there are a few practical details to keep in mind. From my experience digging through special collections for a thesis, the best first move is to search the 'Lilly Library Digital Collections' and IUCAT to see if the item has already been scanned. If it hasn’t, the library usually accepts reproduction requests through a web form or by contacting staff. You’ll need to give a clear citation (collection name, box/folder, item number) and explain the purpose—simple research requests are treated differently from publication or commercial use. Some items are restricted for preservation, donor, or copyright reasons, so staff will tell you whether scans are possible and what quality they can provide. Timing and fees vary. For classroom or student research, libraries sometimes waive or reduce fees and can prioritize requests, but don’t expect same-day results for fragile or large collections. If you can, request low-resolution images first for note-taking, and ask about permissions if you plan to publish. I found that polite, specific requests and patience go a long way; the staff are usually super helpful and love enabling research, so don’t hesitate to reach out through the Lilly website contact or the reproduction request form.

I get pumped anytime someone asks about citing special collections, because it's one of those tiny academic skills that makes your paper look polished. If you're using manuscripts from the Lilly Library at Indiana University, the core bits I always include are: creator (if known), title or a short descriptive title in brackets if untitled, date, collection name, box and folder numbers (or manuscript number), repository name as 'Lilly Library, Indiana University', and the location (Bloomington, IN). If you used a digital surrogate, add the stable URL or finding aid and the date you accessed it. For illustration, here's a Chicago-style notes example I personally use when I want to be precise: John Doe, 'Letter to Jane Roe', 12 March 1923, Box 4, Folder 2, John Doe Papers, Lilly Library, Indiana University, Bloomington, IN. And a bibliography entry: John Doe Papers. Lilly Library, Indiana University, Bloomington, IN. If something is untitled I put a brief description in brackets like: [Draft of short story], 1947. Don't forget to check the manuscript's collection guide or 'finding aid' for the exact collection title and any manuscript or MSS numbers—the staff there often supply a preferred citation, which I always follow. Finally, I usually email the reference librarian a quick question if I'm unsure; they tend to be very helpful and will even tell you the preferred repository wording. Works great when you're racing the deadline and trying not to panic.

Oh, this is one of those tiny math tricks that makes life way easier once you get the pattern down — converting milliseconds into standard hours, minutes, seconds, and milliseconds is just a few division and remainder steps away. First, the core relationships: 1,000 milliseconds = 1 second, 60 seconds = 1 minute, and 60 minutes = 1 hour. So multiply those together and you get 3,600,000 milliseconds in an hour. From there it’s just repeated integer division and taking remainders to peel off hours, minutes, seconds, and leftover milliseconds. If you want a practical step-by-step: start with your total milliseconds (call it ms). Compute hours by doing hours = floor(ms / 3,600,000). Then compute the leftover: ms_remaining = ms % 3,600,000. Next, minutes = floor(ms_remaining / 60,000). Update ms_remaining = ms_remaining % 60,000. Seconds = floor(ms_remaining / 1,000). Final leftover is milliseconds = ms_remaining % 1,000. Put it together as hours:minutes:seconds.milliseconds. I love using a real example because it clicks faster that way — take 123,456,789 ms. hours = floor(123,456,789 / 3,600,000) = 34 hours. ms_remaining = 1,056,789. minutes = floor(1,056,789 / 60,000) = 17 minutes. ms_remaining = 36,789. seconds = floor(36,789 / 1,000) = 36 seconds. leftover milliseconds = 789. So 123,456,789 ms becomes 34:17:36.789. That little decomposition is something I’ve used when timing speedruns and raid cooldowns in 'Final Fantasy XIV' — seeing the raw numbers turn into readable clocks is oddly satisfying. If the milliseconds you have are Unix epoch milliseconds (milliseconds since 1970-01-01 UTC), then converting to a human-readable date/time adds time zone considerations. The epoch value divided by 3,600,000 still tells you how many hours have passed since the epoch, but to get a calendar date you want to feed the milliseconds into a datetime tool or library that handles calendars and DST properly. In browser or Node contexts you can hand the integer to a Date constructor (for example new Date(ms)) to get a local time string; in spreadsheets, divide by 86,400,000 (ms per day) and add to the epoch date cell; in Python use datetime.utcfromtimestamp(ms/1000) or datetime.fromtimestamp depending on UTC vs local time. The trick is to be explicit about time zones — otherwise your 10:00 notification might glow at the wrong moment. Quick cheat sheet: hours = ms / 3,600,000; minutes leftover use ms % 3,600,000 then divide by 60,000; seconds leftover use ms % 60,000 then divide by 1,000. To go the other way, multiply: hours * 3,600,000 = milliseconds. Common pitfalls I’ve tripped over are forgetting the timezone when converting epoch ms to a calendar, and not preserving the millisecond remainder if you care about sub-second precision. If you want, tell me a specific millisecond value or whether it’s an epoch timestamp, and I’ll walk it through with you — I enjoy doing the math on these little timing puzzles.

Okay, let me unpack this in a practical way — I read your phrase as asking whether using millisecond/hour offsets (like shifting or stretching subtitle timestamps by small or large amounts) can cut down subtitle sync errors, and the short lived, useful truth is: absolutely, but only if you pick the right technique for the kind of mismatch you’re facing. If the whole subtitle file is simply late or early by a fixed amount (say everything is 1.2 seconds late), then a straight millisecond-level shift is the fastest fix. I usually test this in a player like VLC or MPV where you can nudge subtitle delay live (so you don’t have to re-save files constantly), find the right offset, then apply it permanently with a subtitle editor. Tools I reach for: Subtitle Edit and Aegisub. In Subtitle Edit you can shift all timestamps by X ms or use the “synchronize” feature to set a single offset. For hard muxed matroska files I use mkvmerge’s --sync option (for example: mkvmerge --sync 2:+500 -o synced.mkv input.mkv subs.srt), which is clean and lossless. When the subtitle drift is linear — for instance it’s synced at the start but gets worse toward the end — you need time stretching instead of a fixed shift. That’s where two-point synchronization comes in: mark a reference line near the start and another near the end, tell the editor what their correct times should be, and the tool will stretch the whole file so it fits the video duration. Subtitle Edit and Aegisub both support this. The root causes of linear drift are often incorrect frame rate assumptions (24 vs 23.976 vs 25 vs 29.97) or edits in the video (an intro removed, different cut). If frame-rate mismatch is the culprit, converting or remuxing the video to the correct timebase can prevent future drift. There are trickier cases: files with hour-level offsets (common when SRTs were created with absolute broadcasting timecodes) need bulk timestamp adjustments — e.g., subtracting one hour from every cue — which is easy in a batch editor or with a small script. Variable frame rate (VFR) videos are the devil here: subtitles can appear to drift in non-linear unpredictable ways. My two options in that case are (1) remux/re-encode the video to a constant frame rate so timings map cleanly, or (2) use an advanced tool that maps subtitles to the media’s actual PTS timecodes. If you like command-line tinkering, ffmpeg can help by delaying subtitles when remuxing (example: ffmpeg -i video.mp4 -itsoffset 0.5 -i subs.srt -map 0 -map 1 -c copy -c:s mov_text out.mp4), but stretching needs an editor. Bottom line: millisecond precision is your friend for single offsets; two-point (stretch) sync fixes linear drift; watch out for frame rate and VFR issues; and keep a backup before edits. I’m always tinkering with fan subs late into the night — it’s oddly satisfying to line things up perfectly and hear dialogue and captions breathe together.

Okay, quick and cozy breakdown: the runtime depends on which version of 'Miss Marple: The Body in the Library' you mean, because there are a couple of TV adaptations and they’re formatted differently. If you’re talking about the older BBC adaptation featuring Joan Hickson from the 1980s, that one was presented across two TV episodes—each roughly about an hour with commercials or around 50–55 minutes without—so together you’re looking at roughly 100–110 minutes total. It’s that leisurely, serialized pace that lets the mystery breathe a bit more and gives you time to savor the village details. I’ve watched it on DVD and it felt like a cozy two-night watch. On the other hand, the later ITV/’Marple’ style feature (the early 2000s adaptation starring Geraldine McEwan) is usually packaged as a single, feature-length TV episode, roughly around 90–100 minutes depending on the release and whether you’re seeing a version with or without adverts. Streaming services and DVDs sometimes list slightly different runtimes because of credit sequences or PAL/NTSC speed differences, so if you need an exact minute count for a screening, check the platform info. Personally, I tend to pick the version that matches my mood: slow tea-and-clues (Joan Hickson) or punchier one-sit viewing (Geraldine McEwan).

Totally — you can call to confirm Beverly Hills library hours today, and I usually do that when I’m planning a quick trip. I’ll often look up the library’s phone number via Google Maps or the official city website, then ring their main line during expected business hours. If you hit voice mail, listen for recorded holiday closures or special notices; many libraries put updated info on the recording first. If you want to get extra mileage out of the call, ask about last-minute program cancellations, whether curbside pickup is running, and any temporary study-room restrictions. I also check the library’s social pages after I call — sometimes they post photos or quick notes about unexpected closures. Ringing actually saves me time compared to arriving to find the doors locked, and it’s satisfying to hear a human confirm the details before I hop in the car.