Library

Vim And Vigor

Vim and vigor describes a character's lively energy, enthusiasm, and dynamic presence, often seen in protagonists or spirited figures who drive the plot forward with infectious passion and unstoppable determination.

The Cursed Alpha and his Mysterious Mate

Khalid was catapulted into the mysteries of the world that made him miserable. He has always wished to be normal, of having his own mate and being the best Alpha he could ever dream of. But then, it seemed like his dream was very far from being accomplished. His plans were in pieces, his pain is unbearable and his life is a disgrace. In his quest of finding a solution to all the weird happenings, he meets Megan Zaron. What would he end up doing? Let his heart find the vigor or would rather push away the person who turned out to be his long awaited wish.

110 Chapters

Haunted

Her pulchritudinous black pools as big as saucers were shooting daggers on him. A streak of rage, might and valor whooshes from them that flame sharp and fierce like the orbs of a tigress before it hunts its prey making him almost wet his pants. The reprobate shivers in terror by the cogency of force whizzed from her aura yet tries to conceal it using his words. "My beauty...." She is just a woman....what can a puny female do to a minacious monster like him? He thought but that was the biggest mistake the wretch has ever made. The sound of his annoying words into her ears caused a fathomless fury in the queen's existance. "You cannot do anything to my kingdom, Otaku. Your end is destined in my hands." She yelled with power and pride whirling her head towards the profligate as her long hair swayed in the air with vigor like a Goddess of victory. Amara turned around hurling in air. Raising it up in a duress she flung the sword, right into his kernel ripping the flush away off the libertine's chest. Otaku shuddered under her cold gaze turning to a ball of flesh and gazed at the dominion queen in helplessness. But the next thing that happened between them had shaken up the entire humanity. The bloodied sword dropped from the queen's hand draining the life out of her face as she succumbed to floor on her knees beside the body of Otaku. "Otaku....you are....you are...." But it was too late for the realization. Note: This book has two parts in it. Enjoy

Not enough ratings

55 Chapters

Born to be a Superstar

Her marriage felt like a worldly hell; unloved by her husband, openly cheated on, labeled as leveraging opportunities to join the famed Don William family conglomerate across the Western world. Her life was steeped in deceit ever since those sacred vows were uttered. Determined to retaliate against all the pain inflicted by her ex-husband, Don Austin William, Jane stepped aside for a moment. Though her conscience whispered that revenge would only consume her life. Jane was reborn as a top celebrity. She shed her name and everything from her past, starting afresh with vigor despite her frozen heart when it came to love. Initially, Jane began to let go of her resentment and disappointment. She was tired of juggling endless schedules and work. Unfortunately, Austin returned. Using her popularity, she resolved to get even with him. She aimed to make him kneel and beg for her love. She planned to discard him once Austin fell into her arms. However, bit by bit, her past unfolded. Would her revenge succeed as she desired? Or would Jane willingly throw herself back into her own personal hell?

Not enough ratings

172 Chapters

The Billionaire Heiress Baby

She was killed by her husband and her twin sister just because of her money, left to burn with the baby in her womb, and after obtaining a third degree burn, she is left unrecognizable, a complete monster. But that doesn't bother her, because her baby is safe and sound, but then, she hears that her baby, her precious baby boy did not make it, and all hell is let loose. Now, after going through numerous plastic surgeries, she is reborn, with more vigor and fire in her heart, and more beauty to her credit. She is set out to kill and destroy, and nothing will stand in her way, not even a second chance at love; or will it?

131 Chapters

Alpha Atlas

Raelynn Tress had never been strong or proud like the other werewolves in her pack. Fate had different plans, pairing her with the young Alpha Atlas Andino. Tossed aside as Alpha Atlas chose another, Raelynn leaves the pack with her Mom by her side. With a new pack that accepts her, Raelynn flourishes. She hadn't a clue secrets from the past would draw her home, back into the clutches of the Alpha who once rejected her. The world is changing, just as Raelynn changed. Undiscovered enemies lurk in every corner. Will she find her place in this new world, or be devoured by enemies she never knew existed?

9.8

130 Chapters

SIN

What do you do when your brother's best friend catches you masturbating?Ashley Green is consider the goody two shoes who is always hidden in the shadows of her brother, but maybe she isn't much of a good girl as everyone thinks. What do you think Ashley would do when her brother's best friend catches her masturbating? Beg for her dirty little secret to be kept? Be ashamed of herself? Or give in to the underlying sinful desires that strikes her nerves at the sight of the pierced tattooed green eyed?

9.7

116 Chapters

How Do I Use Sudo With Wq In Vim To Save Protected Files?

3 Answers2025-09-07 04:29:38

Totally hit this snag before — you open a file in vim, make your edits, and then bam: permission denied when you try to save. The neat little trick I use most often is this one-liner from inside vim: :w !sudo tee % >/dev/null

What that does is write the buffer to the sudoed 'tee' command, which will overwrite the original file as root. The % expands to the current filename, so the full flow is: vim hands the file contents to sudo tee, tee writes it with elevated rights, and the >/dev/null part hides the tee output so your buffer stays as-is. After that you can do :q to quit. I like this because it’s fast and doesn’t require reopening the file as root.

If you want a slightly cleaner approach, consider using sudoedit (sudo -e) to open files with your preferred editor as a temporary safe copy — it edits a temp file and then installs it as root, which is safer from a security perspective. For convenience I sometimes create a vim command or mapping, like cnoremap W!! w !sudo tee % >/dev/null, so typing :W!! saves without fuss. Also, if you frequently need root saves, the plugin 'sudo.vim' (provides commands like :SudoWrite) is worth installing. Each method has trade-offs: the tee trick is quick, sudoedit is safer, and opening vim with sudo from the start (sudo vim file) works but bypasses some safety models.

Which Materials Make The Most Durable Vim Wrench Models?

4 Answers2025-09-04 14:49:03

If I had to pick a short list right off the bat, I'd put chrome-vanadium and S2 tool steel at the top for most durable vim wrench models. Chrome-vanadium (Cr-V) is what you'll see on a lot of high-quality ratchets and hex sets—it balances hardness and toughness well, resists wear, and takes a nice finish. S2 is a shock-resisting tool steel that's common for bits and hex keys designed to take a lot of torque without snapping. For heavy, impact-style use, chrome-molybdenum (Cr-Mo) or 4140/6150 alloys are common because they absorb shocks better and can be heat-treated for high strength.

Finish and heat treatment matter as much as base alloy. Hardened and tempered tools in the HRC 52–62 range tend to last; too hard and they become brittle, too soft and they round off. Coatings like black oxide, phosphate, or nickel chrome help with corrosion; TiN or other nitriding can up wear resistance. In short: pick S2 or Cr-V for everyday durability, Cr-Mo for impact-duty, and pay attention to heat treatment and finish for real longevity. I tend to favor sets with solid forging and clear HRC specs—that’s saved me from snapping a hex at an awkward moment.

How Should I Maintain A Vim Wrench To Prevent Rust?

4 Answers2025-09-04 07:21:21

Honestly, I treat my tools a little like prized comics on a shelf — I handle them, clean them, and protect them so they last. When it comes to a vim wrench, the simplest habit is the most powerful: wipe it down after every use. I keep a small stash of lint-free rags and a bottle of light machine oil next to my bench. After I finish a job I wipe off grit and sweat, spray a little solvent if there’s grime, dry it, then apply a thin coat of oil with a rag so there’s no wet residue to attract rust.

For bits of surface rust that sneak in, I’ll use fine steel wool or a brass brush to take it off, then neutralize any remaining rust with a vinegar soak followed by a baking soda rinse if I’ve used acid. For long-term protection I like wax — a microcrystalline wax like Renaissance or even paste car wax gives a water-repellent layer that’s pleasantly invisible. If the wrench has moving parts, I disassemble and grease joints lightly and check for play.

Storage matters almost as much as treatment: a dry toolbox with silica gel packets, not left in a damp car or basement, keeps rust away. Little routines add up — a five-minute wipe and oil once a month will make that wrench feel like new for years.

Which Characters Define The Most Famous Vim Hempstead Series?

1 Answers2025-09-06 09:36:57

Huh — that name caught me off guard, but in the best way. I’m not spotting a widely known franchise called 'Vim Hempstead', so I’m guessing there might be a small typo or a niche indie series you’ve come across. Either way, I love these little mysteries, so I’ll walk through how I’d pick the characters that really define a ‘most famous’ series and give concrete examples from familiar titles so you can see the pattern. If you actually meant a specific book or comic, drop the exact title and I’ll map the characters precisely.

When fans say a series is defined by its characters, they usually mean a handful of roles that keep showing up: the stubborn, morally complex protagonist; the charismatic foil or rival; a mentor who shows the world’s rules; an antagonist who forces growth; and a small ensemble of friends who bring heart and humor. For instance, if we think of 'Mistborn', the defining pieces are Vin (the reluctant protagonist whose street-smarts and growth carry the arc), Kelsier (the larger-than-life mentor/rebel who shapes Vin’s worldview), Elend (the idealistic foil and eventual partner), the Lord Ruler (the pressing, mythic antagonist), and Sazed (the philosophic friend/keeper of wisdom). Swap in 'The Witcher' and you’ve got Geralt as the central, gruff moralist; Yennefer and Ciri as the catalytic figures who stretch his loyalties and purpose; and foes like the Wild Hunt or political conspirators who turn the scale. The pattern is consistent: one driving viewpoint character, one or two characters who challenge or complement them emotionally, a wise older figure or ideological counterpoint, and antagonists who test everything.

If you want a checklist to identify the defining characters of a series you’re curious about, here’s something I actually use when I’m arguing with friends in forums: (1) Who the fans talk about most — that’s your protagonist; (2) Who changes the protagonist’s trajectory the most — that’s your catalyst or mentor; (3) Who embodies the series’ themes — often a secondary lead or antagonist; (4) Who provides emotional or comedic ballast — a friend or ensemble member; and (5) Who’s responsible for the central conflict — the antagonist or system. So, if your 'Vim Hempstead' reference points to a lesser-known indie series, run through that checklist and you’ll likely land on the five or six names that define it. If you were aiming at a specific series like 'Mistborn' or 'The Witcher' (or even something wildly different), tell me and I’ll list the core characters and why each one is essential — I get a kick out of these character dissections and swapping hot takes over coffee or late-night forum scrolls.

How Do You Install Plugins In M Vim On MacOS?

4 Answers2025-09-03 18:14:39

If you're running MacVim (the mvim command) on macOS, the simplest, most reliable route for me has been vim-plug. It just feels clean: drop a tiny bootstrap file into ~/.vim/autoload, add a few lines to ~/.vimrc, then let the plugin manager handle the rest. For vim-plug I run: curl -fLo ~/.vim/autoload/plug.vim --create-dirs https://raw.githubusercontent.com/junegunn/vim-plug/master/plug.vim. After that I edit ~/.vimrc and add:

call plug#begin('~/.vim/plugged')
Plug 'tpope/vim-sensible'
Plug 'junegunn/fzf', { 'do': { -> fzf#install() } }
call plug#end()

Then I launch MacVim with mvim and run :PlugInstall (or from the shell mvim +PlugInstall +qall) and watch the plugins clone and install. A few handy things: if a plugin needs build steps, check its README; some require ctags, ripgrep, or Python support. Also remember MacVim reads your ~/.vimrc (and you can put GUI tweaks in ~/.gvimrc). If you prefer built-in package management, the pack/start method works too: mkdir -p ~/.vim/pack/vendor/start && git clone ~/.vim/pack/vendor/start/, then restart mvim.

How Does M Vim Compare To Neovim For Plugins?

4 Answers2025-09-03 18:19:40

Okay, here’s the short version first, but then I’ll expand — I love geeking out about editor choices. For plugins, Neovim is the one that pushed the ecosystem forward: it brought a clean RPC-based plugin model, first-class async job handling, and a modern Lua API that plugin authors love. That means a lot of recent plugins are written in Lua or expect Neovim-only features like virtual text, floating windows, and extmarks. The result is snappier, more feature-rich plugins that can do things without blocking the UI.

If you use 'm vim' (think classic Vim or MacVim builds), you still get a massive, mature plugin ecosystem. Many plugin authors keep compatibility with Vim, and core functionality works fine — but some newer plugins either require extra patches, rely on Vim being compiled with specific features (job control, Python/Ruby/Node support), or are Neovim-only because they use the Lua or RPC APIs. Practically, that means your favorite long-lived plugins like statuslines, file explorers, and linters usually work on either, but cutting-edge integrations (native LSP clients, modern completion engines written in Lua) will feel more at home in Neovim.

My take: if you want modern plugins, async performance, and future-facing features, Neovim wins. If you prefer a familiar Vim experience, GUI comforts on macOS, or rely on plugins that haven’t migrated, 'm vim' still serves well. I ended up switching because I wanted Lua-based configs and non-blocking LSP, but I still keep a light Vim profile around for quick GUI sessions.

What Are The Best Startup Optimizations For M Vim?

5 Answers2025-09-03 05:08:31

Oh wow, trimming 'mvim' startup is one of those tiny joys that makes the whole day smoother. I usually start by profiling so I know what's actually slow: run mvim --startuptime ~/vim-startup.log and open that log. It quickly shows which scripts or plugins dominate time. Once I know the culprits, I move heavy things into autoload or optional plugin folders so they only load when needed.

Next, I use lazy-loading with a plugin manager like 'vim-plug' (Plug 'foo', { 'on': 'SomeCommand' } or 'for': ['python', 'javascript']). Put plugins you need immediately in 'start' and everything else in 'opt' or load by filetype. Also disable unnecessary providers (let g:loaded_python_provider = 0, let g:loaded_ruby_provider = 0) if you don't use them — that shave off seconds. Finally, keep UI tweaks minimal for GUI start: font fallback, complex statuslines and external helpers (like large LSPs) can wait until you open a project. After a few iterations of profile → defer → test, 'mvim' feels snappy and more pleasant to use.

Does M In Vim Support Digits Or Special Mark Names?

5 Answers2025-09-03 01:44:27

Oh, this one used to confuse me too — Vim's mark system is a little quirky if you come from editors with numbered bookmarks. The short practical rule I use now: the m command only accepts letters. So m followed by a lowercase letter (ma, mb...) sets a local mark in the current file; uppercase letters (mA, mB...) set marks that can point to other files too.

Digits and the special single-character marks (like '.', '^', '"', '[', ']', '<', '>') are not something you can create with m. Those numeric marks ('0 through '9) and the special marks are managed by Vim itself — they record jumps, last change, insert position, visual selection bounds, etc. You can jump to them with ' or ` but you can't set them manually with m.

If you want to inspect what's set, :marks is your friend; :delmarks removes marks. I often keep a tiny cheat sheet pasted on my wall: use lowercase for local spots, uppercase for file-spanning marks, and let Vim manage the numbered/special ones — they’re there for navigation history and edits, not manual bookmarking.

Why Is Vim Auto-Indent Not Working After Vimrc Changes?

4 Answers2025-09-04 02:43:46

Man, that frustration is so real — I’ve been there. First thing I do is check whether vim even thinks it should indent: open the file and run :set filetype? and :verbose set autoindent. If filetype is empty or wrong, indent scripts won’t run. If :verbose shows autoindent being turned off by some script, that points to the culprit.

Next, consider obvious toggles that silently kill indentation: if you’ve got 'set paste' enabled (or you toggled paste mode earlier with a mapping), indentation won’t behave. Also check whether you disabled 'autoindent', 'smartindent', or 'cindent' by mistake. Use :set paste? and :set autoindent? to inspect current state.

If those look fine, source your vimrc manually (:source ~/.vimrc) and watch :messages for errors — a syntax error early in the file can stop the rest of the config from loading, so later indent settings never get applied. Also run vim -u NONE (or nvim -u NORC) to see if a vanilla session indents correctly; if it does, a plugin or a line in your vimrc is to blame. Useful commands: :scriptnames (shows loaded scripts), :verbose set shiftwidth? tabstop? expandtab? and checking ~/.vim/indent or plugin ftplugin files for overrides. If you want, paste the problematic snippet and I’ll poke at it with you.

How To Write And Quit Vim Without Saving Changes?

3 Answers2025-08-08 23:17:55

I remember the first time I used vim and couldn't figure out how to exit without saving. It was frustrating, but I learned the hard way. To quit vim without saving changes, you need to press the 'Esc' key first to ensure you're in command mode. Then, type ':q!' and hit 'Enter'. The ':q' part tells vim to quit, and the '!' forces it to discard any unsaved changes. It's a lifesaver when you accidentally mess up a file and just want to bail. I've used this countless times when testing configurations or editing scripts I didn't mean to alter.